Opus Easel Assembly Instructions

Introduction

Welcome to Prototype NW's comprehensive Opus Easel assembly instructions. In this guide, we will walk you through the step-by-step process of setting up your Opus Easel, ensuring a hassle-free experience from start to finish. With our detailed instructions and tips, you'll have your Opus Easel ready for use in no time!

Tools and Materials

Before you begin the assembly process, make sure you have the following tools and materials at hand:

• Opus Easel kit (including all necessary parts)
• Phillips screwdriver
• Allen wrench (provided in the kit)
• Clear workspace

Step 1: Unpack the Opus Easel Kit

Start by carefully unpacking the Opus Easel kit. Ensure that all the parts and components are present and undamaged. If you notice any missing or damaged parts, please contact our customer support for assistance.

Step 2: Setting Up the Base

Begin by assembling the base of the Opus Easel. Follow these steps:

1. Place the base on a stable surface, ensuring it is level.
2. Insert the provided screws into the pre-drilled holes on the base.
3. Tighten the screws using the Phillips screwdriver until the base is securely attached.

Step 3: Attaching the Frame

Now it's time to attach the frame to the base. Here's how:

1. Position the frame upright, aligning the holes on the frame and the base.
2. Insert the screws through the holes and tighten them with the Allen wrench.
3. Ensure that the frame is firmly attached to the base before proceeding.

Step 4: Adjusting the Easel Angle

The Opus Easel allows for adjustable angles to accommodate your preferred working position. Follow these steps to adjust the easel angle:

1. Locate the angle adjustment mechanism on the back of the frame.
2. Loosen the adjustment knob to unlock the angle adjustment.
3. Carefully tilt the frame to the desired angle, then tighten the adjustment knob to secure it in place.

Step 5: Mounting the Canvas Board

Once you've set the easel angle, it's time to mount your canvas board. Follow these instructions:

1. Place your canvas board on the provided ledge of the frame.
2. Adjust the ledge to fit the size of your canvas board.
3. Secure the canvas board in place using clamps or any included fasteners.

Step 6: Finishing Touches

Finally, complete the assembly process by performing these finishing touches:

• Inspect the entire Opus Easel to ensure all connections are secure.
• Double-check the easel angle and adjust if necessary.
• Clean the easel using a soft, dry cloth to remove any dust or debris.

Conclusion

Congratulations! You've successfully assembled your Opus Easel. Now you can dive into your artistic endeavors with a reliable and sturdy easel by your side. If you have any questions or require further assistance, don't hesitate to reach out to our customer support team. Happy creating!

Note: The assembly instructions provided are intended as a general guide. Please refer to the specific instructions included in your Opus Easel kit for any variations or additional steps.